-
Loading...>
- Designed for use on all types of gasoline engines, except those with fuel injection, this Dayco® Fuel LineHOSE offers excellent resistance to oil, gasoline, grease, and weather.
- It is constructed with a neoprene cover and nitrile tube for use with leaded, unleaded gasoline and diesel fuel.
- Reinforced with a single ply of braided cord, this Dayco® Fuel LineHOSE meets SAE J30R7 requirements, and meets the fuel permeation requirements of SAE J1527 Class2 specifications.
- ThisHOSE specification does not meet any EPA or California Resources Board emissions requirements; and, should be used only on vehicles exempt from such emmision regulations.
- Note:NOT suitable for gasoline/oil mixed fuels, alcohol blended fuels, or bio-diesel fuel.
- NOT suitable for fuel injection systems.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 002-035-021 - TUBING (HOSE) - WINDSHIELD WASHERLoading...>
- Designed for OE multiple groove pulleys, Dayco® Banded V-Belts are specifically designed for applications where original equipment pulley drive design requires the use of two v-belts joined together by a tie band.
- The belts Raw Edge® construction, 3-ply laminated Fiber and neoprene compounding ensures superior gripping power while the bottom cog construction provides extreme flexibility and cooling.
- By combining two belts utilizing the tie-band process, the Dayco® Banded V-Belt greatly reduces the tendency for single belts, when subjected to fluctuating load tensions, to come off or turn over in multiple belt pulley drives.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 002-035-021 - TUBING (HOSE) - WINDSHIELD WASHERLoading...>
- Designed for OE multiple groove pulleys, Dayco® Banded V-Belts are specifically designed for applications where original equipment pulley drive design requires the use of two v-belts joined together by a tie band.
- The belts Raw Edge® construction, 3-ply laminated fabric and neoprene compounding ensures superior gripping power while the bottom cog construction provides extreme flexibility and cooling.
- By combining two belts utilizing the tie-band process, the Dayco® Banded V-Belt greatly reduces the tendency for single belts, when subjected to fluctuating load tensions, to come off or turn over in multiple belt pulley drives.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for heavy duty and off-road equipment service, Dayco® Heavy Duty Heater Hose is made with the highest quality EPDM compounds and heavy duty spiral reinforcements to withstand high coolant and under-hood temperatures of -40°F (-40°C) to +257°F (+125°C) and provide excellent resistance to coolant and coolant additives.
- This hose meets and exceeds SAE 20R3, Class D-1, Type EC, standard wall construction requirements.
- This Heavy Duty Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 053-008-003 - HOSES & TUBINGLoading...>
- Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco® Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance.
- Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Standard Heater Hose is compatible with all common coolant and coolant additives.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...>
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-003-127 - HOSE - COOLANT, AUXILIARY HEATERLoading...>
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...>
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading...