-
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-003-127 - HOSE - COOLANT, AUXILIARY HEATERLoading...>
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading...
Added to Your Shopping Cart