-
Loading...>
- Designed for use on all types of gasoline engines, except those with fuel injection, this Dayco® Fuel Line Hose offers excellent resistance to oil, gasoline, grease, and weather.
- It is constructed with a neoprene cover and nitrile tube for use with leaded, unleaded gasoline and diesel fuel.
- Reinforced with a single ply of braided cord, this Dayco® Fuel Line Hose meets SAE J30R7 requirements, and meets the fuel permeation requirements of SAE J1527 Class 2 specifications.
- This hose specification does not meet any EPA or California Resources Board emissions requirements; and, should be used only on vehicles exempt from such emmision regulations.
- Note:NOT suitable for gasoline/oil mixed fuels, alcohol blended fuels, or bio-diesel fuel.
- NOT suitable for fuel injection systems.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 042-004-061 - HOSE - RADIATOR, UNIVERSALLoading...>
- Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines:oil, coolants, coolant additives, and temperature ranges of -40°F (-40°C) to +212°F (+100°C).
- This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction.
- This Heavy Duty Straight Radiator Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading...