-
Loading...>
- Designed for use on all types of gasoline engines, except those with fuel injection, this Dayco® Fuel Line Hose offers excellent resistance to oil, gasoline, grease, and weather.
- It is constructed with a neoprene cover and nitrile tube for use with leaded, unleaded gasoline and diesel fuel.
- Reinforced with a single ply of braided cord, this Dayco® Fuel Line Hose meets SAE J30R7 requirements, and meets the fuel permeation requirements of SAE J1527 Class 2 specifications.
- This hose specification does not meet any EPA or California Resources Board emissions requirements; and, should be used only on vehicles exempt from such emmision regulations.
- Note:NOT suitable for gasoline/oil mixed fuels, alcohol blended fuels, or bio-diesel fuel.
- NOT suitable for fuel injection systems.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...>
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...>
- Dayco® Top Cog® Belt is the workhorse of the heavy-duty industry.
- The cogs in the top of the belt deliver increased flexibility around small pulleys, and the increased surface area results in a cooler running belt.
- Polyester cord provides maximum power transfer and tension holding capability for the life of the belt.
- The laminated construction helps absorb greater shock loads associated with diesel engines.
- These Dayco® Top Cog® advantages translate into less downtime, lower maintenance costs, and increased dependability.
- Dayco’s Top Cog® Belt meets or exceeds SAE J636 and J637 specifications.
- This Top Cog® Belt is another Dayco® product proudly made in the USA.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...>
- Back in the early days of the fledgling automotive industry, Dayco® was first to develop a v-belt with the raw edge sidewall construction, which facilitates controlled slippage around pulleys.
- Raw edge construction is combined with Dayco’s patented cogged top design to ensure the top performance that today’s vehicles and drivers demand.
- The Dayco® Top Cog® V-Belt delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts.
- Three plies of neoprene impregnated fabric resist heat, oil, and grease, and a specially formulated treatment of the polyester cord provides the strength, stability, and reliability that are required of a premium quality v-belt.
- The Dayco® Top Cog® Belt’s Raw Edge sidewall construction, patented cogged top design, three ply fabric and specially formulated polyester cord delivers more flexibility, runs cooler and lasts longer than competitive belts. Dayco® Top Cog® V-Belts meet or exceed SAE J636 and J637 specifications.
- This Top Cog® V-Belt is another Dayco® product proudly made in the USA.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...>
- Dayco® Top Cog® Belt is the workhorse of the heavy-duty industry.
- The cogs in the top of the belt deliver increased flexibility around small pulleys, and the increased surface area results in a cooler running belt.
- Polyester cord provides maximum power transfer and tension holding capability for the life of the belt.
- The laminated construction helps absorb greater shock loads associated with diesel engines.
- These Dayco® Top Cog® advantages translate into less downtime, lower maintenance costs, and increased dependability.
- Dayco’s Top Cog® Belt meets or exceeds SAE J636 and J637 specifications.
- This Top Cog® Belt is another Dayco® product proudly made in the USA.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...>
- Dayco® combined the outstanding performance characteristics of the Dayco® Top Cog® Belt with the increased flexibility obtained through bottom-cog technology to make the most flexible heavy duty v-belt available.
- The raw edge construction maintains constant grip to eliminate slip and deliver maximum power on smaller diameter pulleys.
- The combination of top and bottom cogs offers extreme flexibility around smaller diameter pulleys for longer life.
- Polyester cord provides maximum tension-holding capability for the life of the belt.
- Dayco’s Top Cog® Belt meets or exceeds SAE J636 and J637 specifications.
- This Top Cog® V-Belt is another Dayco® product proudly made in the USA.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading...